Máy chiếu : panasonic PT-EZ770ZE - Viễn Đông Corporation

Back to: Máy chiếu

panasonic PT-EZ770ZE

Rating: Not Rated Yet

184.553.000 ₫

SKU: panasonic PT-EZ770ZE

Ask a question about this product

Description
Reviews

Power Supply		100-240 V AC, 50/60 Hz
Power Consumption		590 W (0.3 W when STANDBY MODE set to ECO*1, 10 W when STANDBY MODE set to NORMAL (37 W when STANDBY MODE of AUDIO SETTING set to ON))
LCD panel	Panel size	19.0 mm (16:10 aspect ratio)
	Display method	Transparent LCD panel (x 3, R/G/B)
	Drive method	Active matrix
	Pixels	2,304,0002 (1,920 x 1,200) x 3, total of 6,912,000 pixels
Lens		Powered zoom (throw ratio: 1.7-2.8:1), powered focus, F 1.7-2.3, f 26.9-45.4 mm
Lamp		400 W UHM lamp x 1, lamp replacement cycle (lamp power: Normal/Eco1/Eco2): 3,000 hours/4,000 hours/4,500 hours^*2
Screen size (diagonal)		1.02-10.16 m, 16:10 aspect ratio
Brightness^*3		6,500 lm (lamp power: Normal, Dynamic mode, Standard lens)
Centre-to-corner uniformity^*3		90%
Contrast^*3		5,000:1 (full on/off, lamp power: Auto, iris: On)
Resolution		1,920 x 1,200 pixels^*4
Scanning frequency	DVI-D/ HDMI/ DiplayPort/DIGITAL LINK	fH: 15-80 kHz, fV: 50-85 Hz, dot clock: 162 MHz or lower
	RGB	fH: 15-91 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower (Signals exceeding the dot clock rate of 162 MHz are downsampled.)
	YPBPR (YCBCR)	fH: 15.75 kHz, fV: 60 Hz [480i (525i)] fH: 15.63 kHz, fV: 50 Hz [576i (625i)] fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p] fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF] fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p] fH: 31.50 kHz, fV: 60 Hz [480p (525p)] fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i] fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p] fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p] fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
	Video/YC	fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift^*5	Vertical	±60 % from center of screen (powered)
Optical axis shift^*5	Horizontal	±10 % from center of screen (powered)
Keystone correction range^*6		Vertical ±40°, horizontal ±30°
Installation		Ceiling/floor, front/rear
Built-in speaker		3.7 cm round shape x 1, output power 10.0 W (monaural)
Terminals	DVI-D IN	DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
	HDMI IN	HDMI 19-pin x 1 (Deep Colour, compatible with HDCP), audio signal: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
	DisplayPort IN	DP-20P x 1 (DisplayPort 1.1, compatible with HDCP), audio signal: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
	RGB 1 IN	D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
	RGB 2 IN	BNC x 5 (RGB or YPBPR/YCBCR/YC/VIDEO IN x 1) shared with VIDEO IN (S-video/composite video)
	VIDEO IN	Pin jack x 1 (composite video)
	MONITOR OUT	D-sub HD 15-pin (female) x 1 (RGB x 1) (not compatible with all inputs)
	AUDIO IN	Pin jack x 2 (L/R x 1), M3 x 2 (L-R x 2)
	AUDIO OUT	M3 x 1 (L-R x 1) for output (variable)
	SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
	REMOTE 1 IN	M3 x 1 for wired remote control
	REMOTE 2 IN	D-sub 9-pin (female) x 1 for external control (parallel)
	LAN/DIGITAL LINK	RJ-45 x 1 (for network and DIGITAL LINK (video/audio/network/serial control) connection,
	AUDIO 3 IN	100Base-TX, compliant with PJLink™, HDCP compatible, Deep Color compatible)
Operation noise^*2	AUDIO OUT	37 dB (lamp power: NORMAL), 31 dB (lamp power: ECO 1), 29 dB (lamp power: ECO 2)
Filter	SERIAL IN	x 1, recommended replacement cycle: 15,000 hours*7
Cabinet materials	LAN	Molded plastic (PC + ABS)
Weight^*9		Approximately 10.6 kg (with supplied lens)
Operating environment		Operating temperature: 0-45 °C ^*10, operating humidity: 10-80 % (no condensation)
Supplied accessories		Power cord (including power cord holder) x 1, wireless/wired remote control unit x1, batteries for remote control (AAA/R03/LR03 type) x 2, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) x 1
Dimensions (W x H x D)		530 x 177*8 x 445 mm (with supplied lens)
Weight^*9		Approximately 10.6 kg (with supplied lens)
Operating temperature		Operating temperature: 0-45 °C ^*10, operating humidity: 10-80 % (no condensation)
Supplied accessories		Power cord (including power cord holder) x 1, wireless/wired remote control unit x1, batteries for remote control(AAA/R03/LR03 type) x 2, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) x 1
*1		When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*2		This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. The usage environment affects the duration of the lamp.
*3		Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4		Input signals that exceed the native resolution will be converted to the native resolution.
*5		The axis shift function cannot be used with the ET-ELW21.
*6		With the supplied lens. Value differs when the correction for both directions is operated.
*7		The usage environment affects the duration of the filter.
*8		With legs at shortest position.
*9		Average value. May differ depending on models.